You can prep a house for painting by placing covers near the surfaces you plan to paint, repairing imperfections, glazing windows, scrubbing walls, and performing a final rinse. All these steps are designed to ensure that the paint you apply on your surfaces will have no issues later on.
The preparation stage by painters is probably the most important part of house painting. That’s why it’s essential to learn how to prep a room before attempting to paint to guarantee a smooth finish.
In this blog, we’ll talk more about preparing a room for painting, why you should do it, and whether or not sanding and priming are necessary.
How Do I Prepare a Room for Painting?
To prepare a room for painting, you’ll need to do the following:
Clear Areas to Be Painted
Move as much furniture and items from the rooms you plan to paint as possible. If something is too heavy, you can move it to the middle of the room and place a protective cover.
Inspect and Repair Damaged Walls
Check to see if there are any signs of damage to your walls and repair them. If there are any cracks or holes, make sure to fill them in until they become even.
Wash and Clean Walls
Be sure to wash and clean your walls before applying oil and water based paint to remove any impurities that could hinder the process. Wear a pair of gloves and use soap and water to clean the surfaces.
Dry Walls and Start Painting
Make sure that the walls are dry before you start painting by giving it a final wipe-down with a sponge. Once the walls are clean and dry, you can start painting right away.
Why Prep Walls Before Painting?
The main reason to prep walls before painting is to eliminate factors that could cause problems later on. Walls that are blemished, dented, and dinged will not hold paint as well compared to a clean and fixed wall.
These imperfections will usually pop out once the newly-applied paint has dried. However, the right preparation and repairs beforehand can prevent this from happening.
Do I Need to Sand House Before Painting?
Yes, you’ll need to sand a house before DIY painting. The main reason for this is that sanding allows any coat of paint to bond mechanically with the surface.
Roughing up surfaces sufficiently using sandpaper will allow the applied paint to look and stay good even several years later.
Do You Have to Prime House Before Painting?
Yes, you have to prime a house before painting. The primer acts as a protectant while helping apply the paint evenly on a surface. It also helps it stick around longer.
In other words, the resin-based material will act as the first layer of coating for your paint job. It then will effectively seal the surface below it so that other materials won’t penetrate and cause issues.